MCC5B is a 6 pole, 5 x luminaire output single channel device with PIR presence Connection or 3 pole absence connection.

The MPROG is a compact infrared handset used for the basic programming of IR enabled Metway products.

Pointing the handset

You must point the handset directly at the device that you want to control or program. When programming a device it is only necessary to point the handset when ‘sending’ a new setting.

Sending settings to a device

To send the programming parameters to the device, it is simply a case of pressing the relevant button for the setting you require. If the setting is in red type, you would press the 'Shift' button (this handset will display a red light to denote this) and then press the setting you require.

The Metway 3 pole Besa socket outlet is designed to fit standard 'G' type industry preferred connectors.

This fits straight onto standard round U.K plastic or metal besa/conduit boxes.

Typical applications for this type of connector would be, any installation that has fire regulations insisting on mechanical containment of cabling with the building fabric (e.g where the use of conduit and conduit boxes is required).

The easy fit and connect Besa box is supplied with fixing screw. It offers an easy loop in and out facilitated by double stacked terminal design on mounting plate connectors.

Moulded in V0 grade plastic and rated at 16A, 230V AC +/- 10%, 50Hz with a terminal capacity of 2.5mm², this product is compliant with BS 733:2010+A1:2014 and the connectors to BS61535.

MCC10B is a new version of an existing product. With 10 x 6-pole luminaire outputs. Dual channel with 2 x 6-pole presence connection 2 x 6 + 3-pole absence connection its simple to install and offers a cost effective solution for luminaire connections.

The SmartSensor Remote Control (MDSSR) provides a simple, low cost method to configure the SmartSensor range of DALI multisensors. It can also allow a user to remote control lighting managed by SmartSensor.

Compact and easy to use, MDSSR is smaller than a credit card and slips easily into the pocket.

Supplied in a plastic pouch with a Lithium coin battery and Programming Guide.

The Metway 4 pole Besa socket outlet is designed to fit standard 'G' type industry preferred connectors.

This fits straight onto standard round U.K plastic or metal besa/conduit boxes.

Typical applications for this type of connector would be, any installation that has fire regulations insisting on mechanical containment of cabling with the building fabric (e.g where the use of conduit and conduit boxes is required).

The easy fit and connect Besa box is supplied with fixing screw. It offers an easy loop in and out facilitated by double stacked terminal design on mounting plate connectors.

Moulded in V0 grade plastic and rated at 16A, 230V AC +/- 10%, 50Hz with a terminal capacity of 2.5mm², this product is compliant with BS 733:2010+A1:2014 and the connectors to BS61535.

The Metway 6 pole Besa socket outlet is designed to fit standard 'G' type industry preferred connectors.

This fits straight onto standard round U.K plastic or metal besa/conduit boxes.

Typical applications for this type of connector would be, any installation that has fire regulations insisting on mechanical containment of cabling with the building fabric (e.g where the use of conduit and conduit boxes is required).

The easy fit and connect Besa box is supplied with fixing screw. It offers an easy loop in and out facilitated by double stacked terminal design on mounting plate connectors.

Moulded in V0 grade plastic and rated at 16A, 230V AC +/- 10%, 50Hz with a terminal capacity of 2.5mm², this product is compliant with BS 733:2010+A1:2014 and the connectors to BS61535.

Our 3 pole Besa latching leads, are the mating part to our 3 pole Besa socket outlet. They are supplied with a 3-pole centre latching plug, to a free end using 1.00mm² LS0H cable.

This can be supplied in lengths as per your requirements. These are supplied with a black industry standard, connector coding. Alternatively there is an option for white connectors.

Our 4 pole Besa latching leads, are the mating part to our 4 pole Besa socket outlet. They are supplied with a 4-pole centre latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in lengths as per your requirements.

These are supplied with a black industry standard, connector coding. Alternatively there is an option for white connectors.

Our 6 pole Besa latching leads, are the mating part to our 6 pole Besa socket outlet. They are supplied with a 6-pole centre latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in lengths as per your requirements.

These are supplied with a black/blue industry standard, connector coding. There is an option for white or red covers.