Metway are pleased to congratulate Kevin Stokes – Deputy Warehouse Supervisor for 40 years loyal service.
John joins Metway as Product and Technical Dept Manager and brings with him a wealth of knowledge from over 35 years...
Metway are pleased to congratulate Chris Brown – Internal Business Development Manager and Michael Pumfrey –...
This Saturday night, the Vertu Motors Arena in Newcastle will witness the return of Dublin boxer Jay Byrne as he...
This addition complements our existing range of White and Red sockets and plugs, all featuring the industry-standard...
This project was designed in conjunction with the contractor, Eco-1 of Walsall.
Earlsfort Terrace is a 13,000 m² flagship office development for Irish Life Insurance.
Fibonacci Square is the 34,838sq m redevelopment of the AIB Bankcentre site in Merrion Road
A great day in the office celebrating the Kings Coronation and our Directors birthday Steve Chessell last Thursday!
Darren has spent most of his working life in the Electrical Industry, involved in sales development and management...
There are 5 products.
Active filters
MCC5B is a 6 pole, 5 x luminaire output single channel device with PIR presence Connection or 3 pole absence connection.
Our Scene set control plates are used with our plug in and addressable control modules to permit the control of different lighting groups at different levels. From the plate you can call Scenes 1-4, Raise, Lower and Off. The Off button can also be programmed to a scene value. You press and hold buttons 1-4 to call scene 5-8.
Functions are identical on the Architrave Plate except that there are 2 fewer buttons. Control plates have blue LED back lighting for location and scene identification, and scenes are programmed via hand-held programmer, wirelessly via Bluetooth from a PC, or by using the buttons (eliminating the need for specialist equipment).
Connection to the system is by 4-core cable with a push on male plug to the scene set plate and a RJ12 connector to the LCM.
The MPROG is a compact infrared handset used for the basic programming of IR enabled Metway products.
Pointing the handset
You must point the handset directly at the device that you want to control or program. When programming a device it is only necessary to point the handset when ‘sending’ a new setting.
Sending settings to a device
To send the programming parameters to the device, it is simply a case of pressing the relevant button for the setting you require. If the setting is in red type, you would press the 'Shift' button (this handset will display a red light to denote this) and then press the setting you require.
MCC10B is a new version of an existing product. With 10 x 6-pole luminaire outputs. Dual channel with 2 x 6-pole presence connection 2 x 6 + 3-pole absence connection its simple to install and offers a cost effective solution for luminaire connections.
The SmartSensor Remote Control (MDSSR) provides a simple, low cost method to configure the SmartSensor range of DALI multisensors. It can also allow a user to remote control lighting managed by SmartSensor.
Compact and easy to use, MDSSR is smaller than a credit card and slips easily into the pocket.
Supplied in a plastic pouch with a Lithium coin battery and Programming Guide.
