Metway are pleased to congratulate Kevin Stokes – Deputy Warehouse Supervisor for 40 years loyal service.
MCC5S
MCC5S is a 4 pole, 5 x luminaire output single channel device with PIR presence and absence connection.
There are 4 products.
MCC5S is a 4 pole, 5 x luminaire output single channel device with PIR presence and absence connection.
The MPROG is a compact infrared handset used for the basic programming of IR enabled Metway products.
Pointing the handset
You must point the handset directly at the device that you want to control or program. When programming a device it is only necessary to point the handset when ‘sending’ a new setting.
Sending settings to a device
To send the programming parameters to the device, it is simply a case of pressing the relevant button for the setting you require. If the setting is in red type, you would press the 'Shift' button (this handset will display a red light to denote this) and then press the setting you require.
The SmartSensor Remote Control (MDSSR) provides a simple, low cost method to configure the SmartSensor range of DALI multisensors. It can also allow a user to remote control lighting managed by SmartSensor.
Compact and easy to use, MDSSR is smaller than a credit card and slips easily into the pocket.
Supplied in a plastic pouch with a Lithium coin battery and Programming Guide.