Metway are pleased to congratulate Kevin Stokes – Deputy Warehouse Supervisor for 40 years loyal service.
John joins Metway as Product and Technical Dept Manager and brings with him a wealth of knowledge from over 35 years...
Metway are pleased to congratulate Chris Brown – Internal Business Development Manager and Michael Pumfrey –...
This Saturday night, the Vertu Motors Arena in Newcastle will witness the return of Dublin boxer Jay Byrne as he...
This addition complements our existing range of White and Red sockets and plugs, all featuring the industry-standard...
This project was designed in conjunction with the contractor, Eco-1 of Walsall.
Earlsfort Terrace is a 13,000 m² flagship office development for Irish Life Insurance.
Fibonacci Square is the 34,838sq m redevelopment of the AIB Bankcentre site in Merrion Road
A great day in the office celebrating the Kings Coronation and our Directors birthday Steve Chessell last Thursday!
Darren has spent most of his working life in the Electrical Industry, involved in sales development and management...
There are 14 products.
Active filters
MDCC12B 12 x 6-pole Dali luminaire outputs. 2 x 3-pole Dali sensor connection. 125mA Dali power supply. Option for Bluetooth Dali module installation.
MCC5S is a 4 pole, 5 x luminaire output single channel device with PIR presence and absence connection.
Our MCC Connection Centre and MDCC standalone addressable LCM, can be connected using the same leads. They are supplied with a 6-pole side latching plug, to a free end using 1.00mm² LS0H cable.
This can be supplied in a variety of cores, and lengths as per your requirements.
These are supplied with a black/blue industry standard, connector coding.
Alternatively there is an option for black/grey connectors.
Our Metway fully addressable leads are supplied with a 6-pole side latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in a variety of cores, and lengths as per your requirements.
These are supplied with a black/blue industry standard, connector coding. These leads will connect to the two fully addressable lcm's MA-DD1LCM10/M and also MA-DS10LCM10-S5.
The Metway DALI gateway provides an interface between DALI lighting products and our addressable control system. The module acts as a fully functional DALI addressable product with 64 individually programmable addresses. Each address can be a DALI luminaire, emergency inverter, PIR sensor, controlled relay or scene set plate.
The DALI64 is DIN rail mounted and enclosed in a steel powder coated enclosure wired to industry standard terminals.
Twin DALI64 units (i.e with 128 addresses) is also available.
A removeable memory module facilitates fast configuration of a replacement gateway should that be needed. In other words, should an gateway need to be replaced for any reason, no reprogramming is necessary, simply remove the memory module and reinsert it into the new controller.
Our classic latching lead, can be used in a variety of LCM's (For example: Phillips Dynalite). They are supplied with a 6-pole centre latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in a variety of cores, and lengths as per your requirements.
These are supplied with a black/blue industry standard, connector coding. Alternatively there is an option for black/grey connectors.
Our classic non-latching box lead, can be used in a variety of LCM's (For example: Delmatic, Ex-Or). They are supplied with a 6-pole centre latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in a variety of cores, and lengths as per your requirements.
These are supplied with a black/grey industry standard, connector coding. Alternatively there is an option for black/blue connectors.
Metway can provide leads for other manufacturers lcms, such as Ensto.
The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.
This can be supplied in a variety of cores, and length as per your requirements.
These are provided with a blue/white industry standard connector coding.
Metway can provide leads for other manufacturers lcms, such as Ex-Or.
The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.
This can be supplied in a variety of cores, and length as per your requirements.
These are provided with a black/grey industry standard connector coding.
Metway can provide leads for other manufacturers lcms, such as CP Electronics.
The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.
This can be supplied in a variety of cores, and length as per your requirements.
These are provided with a black/blue industry standard connector coding.
Metway can provide leads for other manufacturers lcms, such as Hager Klik.
The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.
This can be supplied in a variety of cores, and length as per your requirements.
